Yuhong Group Co.,Ltd
Yuhong Holding Group Co.,LTD
Add to Cart
ASTM B564 Inconel 690 Flange
ASTM B564 covers nickel-based alloy forgings, including flanges, valves, pipe fittings, etc., suitable for high temperature, high pressure and highly corrosive environments.
Resistant to high temperature oxidation up to 1100°C (high chromium content, forming a stable chromium oxide layer). Resistant to stress corrosion cracking (SCC), especially resistant to chloride, sulfide and caustic (such as NaOH) environments. Low radiation sensitivity, can be widely used in nuclear power equipment.
ASTM B564 Inconel 690 flanges are the top choice for nuclear power, high temperature caustic and chloride corrosion environments. Its high chromium content gives it unparalleled resistance to oxidation and SCC. Despite its high cost, it is irreplaceable in key components of nuclear power plants (such as steam generators). Strictly follow industry specifications (such as ASME III) when selecting, and carefully evaluate alternative materials in strong acid or extreme high temperature scenarios.
Chemical Composition of Inconel Alloy 690 (UNS N06690) Round Bar
| Ni | Cr | Fe | Cu | Mn | Si | C | S |
| 58.0 min | 27.00 – 31.00 | 7.00 – 11.00 | 0.50 max | .50 max | 0.50 max | 0.05 max | 0.01 max |
| Density | 8.19 g/cm3 |
| Melting Point | 1343-1377 °C (2450-2510 °F) |
| Tensile Strength | MPa – 66.80 |
| Yield Strength (0.2%Offset) | MPa – 110 |
| Elongation | 39 % |
| Specification | ASTM B / ASME SB 166 |
| Dimensions | ASTM, ASME and API |
| Finish | Bright, Polish & Black |
| Length | 100 mm To 3000 mm Long & Above |
| Size | 5 mm To 500 mm Dia |
| Sheet/Plate | Round Bar/Wire | Pipe | Tube | Fittings | Forgings |
| ASTM B / ASME SB 168 / 906, ASME N-525 | ASTM B / ASME SB 166 | ASTM B / ASME SB 163 and 167 / 829 | ASTM B / ASME SB 163 and 167 / 829 | ASTM B / ASME SB 366 | ASTM B / ASME SB 564 AMS 5666 |
Nuclear power industry:
PWR steam generator tube sheet flanges, primary cooling system.
High radioactive environment connectors for nuclear waste treatment equipment.
Chemical and petrochemical:
High temperature sulfuric acid alkylation reactor flanges, caustic evaporator pipelines.
Energy and environmental protection:
Gas treatment system of waste incinerator, hot end components of gas turbine.
Marine engineering:
High pressure pipeline flanges for seawater desalination equipment (resistant to Cl⁻ corrosion).
