Yuhong Group Co.,Ltd
Yuhong Holding Group Co.,LTD
Add to Cart
| Property | GRADE | ||||||
| WPHY 42 | WPHY 46 | WPHY 52 | WPHY 60 | WPHY 65 | WPHY 70 | ||
| Yield Minᴬ 0.2 Ksi[MPa] | Strength , % offset, | 42[290] | 46[315] | 52[360] | 60[415] | 65[450] | 70[485] |
| Elongation | 60[415] | 63[435] | 66[455] | 75[515] | 77[530] | 80[550] | |
| Standard Specimen, Size Specimen , | Round Or small Proportional Min,% in 4D | -85[585] | -88 [605] | -91[625] | -100 [690] | -102 [705] | -105 [725] |
| Rectangular For section 5/16 in. And over, Sizes tested Section;min, | specimen, thickness [7.94 mm] And for all In full % in 2 in . [50 mm] | 25 | 25 | 25 | 20 | 20 | 20 |
| Rectangular For Less than [7.94 mm]; [50 mm]. Specimen | Specimen Thickness 5/16 in. Min % 2 in. Width of 1.50 in . [40 mm] | 32 | 23 | 23 | 28 | 28 | 28 |
| Rectangular For Less than [7.94 mm]; [50 mm]. Specimen | Specimen, Thickness 5/16 in . Min, % 2 in . Width of 1.50 in . [40 mm] | B | B | B | B | B | B |
| Grade | C | Mn | S | P | Si | Ni | Cr | Mo | Cu | Ti | V | Cb | Al |
| WPHY 60 | 0.20 | 1.00-1.45 | 0.03 | 0.01 | 0.15-0.40 | 0.50 | 0.30 | 0.25 | 0.35 | 0.05 | 0.10 | 0.06 |
|
ASTM A860 WPHY GR 60 PIPE FITTINGS MECHANICAL PROPERTIES
| Element | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| WPHY 60 | 515-690 | 415 | 28 % |
Carbon Steel A860 WPHY 60 Elbow Specification
| Standard Specification : | ASTM A860 WPHY 60 Fittings |
| Check Sizes: | (SMLS UPTO 24”) 1/2” TO 36” (Buttweld 8” TO 36” ) |
| Standard: | MSS-SP-43 Type A Fittings, JIS B2312 Fittings, ANSI B16.28 Fittings, JIS B2313 Fittings, ANSI B16.9 Fittings, MSS-SP-43 Type b Fittings, MSS-SP-43 Type B Fittings |
| Application: | Chemical Industry Natural Gas Industry Oil And Gas Industry Fabrication Industry Nuclear Power Plant Water Pipeline Industry |
| Fitting Machining Equipment: | Press machine, Bending machine, Electric bevelling machine, Sand-blasting machine, Pushing Machine etc |
| Dimensions Class: | 2000#, 3000#, 6000#, 9000# |
| Thickness: | View Our Thickness: Sch5S, Sch10, Sch20, Sch10, Sch20, Sch30, SchTD, Sch40, Sch60, XS, Sch80, Sch100, Sch120, Sch140, Sch160. |
| Coating Fitting Faces : | Zinc Plated, Oil Black Paint, Yellow Transparent, Cold and Hot Dip Galvanized, Anti-rust Paint |
| Rating Pressure: | Pressure Rating Of: 3000 LBS, 6000 LBS, 9000 LBS |
