Stainless Steel Seamless Tube GOST 9941-91, DIN 17456, DIN 17458, EN10216-5, ASME SA213, DIN 28180, NF A49-217. For boiler, Heat Exchanger, Cooling, Heater application.

Specification:

ASME SA213/A213: Standard Specification for Seamless Ferritic and Austenitic Alloy-

Steel Boiler, Superheater and Stainless Steel Heat Exchanger Tubes.

ASTM A249 / A249M:Standard Specification for Welded Austenitic Steel Boiler, Superheater

Heat-Exchanger, and Condenser Tubes.

Other Standard:DIN 17456 , DIN 17458, EN10216-5, GOST 9940-81, GOST 9941-81, JIS-G3463,...

Material Grade:

American Standard

Austenitic Steel:

TP304,TP304L,TP304H, TP304N, TP310S,TP316,TP316L,TP316Ti,TP316H, TP317,TP317L, TP321, TP321H,TP347, TP347H,904L…

Duplex Steel :

S32101,S32205,S31803,S32304,S32750, S32760

Others:TP405,TP409, TP410, TP430, TP439,...

Europen Standard

1.4301,1.4307,1.4948,1.4541,1.4878,1.4550,1.4401,1.4404,1.4571,1.4438, 1.4841,1.4845,1.4539,1.4162, 1.4462, 1.4362, 1.4410, 1.4501

Gost Standard

08Х17Т,08Х13,12Х13,12Х17,15Х25Т,04Х18Н10,08Х20Н14С2, 08Х18Н12Б,10Х17Н13М2Т,10Х23Н18,08Х18Н10,08Х18Н10Т, 08Х18Н12Т,08Х17Н15М3Т,12Х18Н10Т,12Х18Н12Т,12Х18Н9, 17Х18Н9, 08Х22Н6Т, 06ХН28МДТ

Size Range:

Production	Outside Diameter	Wall Thickness
BoilerTube	6.00mm to 101.6mm	0.5mm to 8mm

Final Finishing

Solution Annealed & Pickled/Bright Annealed.

Type of Tubes:

U-bend & Straight.

Some of the quality tests carried out by us includes:

Corrosion Test	Conducted only when specially requested by the client
Chemical Analysis	Test done as per required quality standards
Destructive / Mechanical Testing	Tensile \| Hardness \| Flattening \| Flare \| Flange
Reverse-bend and Re. flat tests	Carried out in full compliance with relevant standards & ASTM A-450 and A-530 norms, which ensures trouble-free expansion, welding & use at customers end
Eddy Current Testing	Done to detect homogeneities in subsurface by using Digital Flaw-mark Testing System
Hydrostatic Testing	100% Hydrostatic Testing carried out according to ASTM-A 450 norms for checking tube leakage, and biggest pressure we can support 20Mpa/7s .
Air Under Pressure Test	To check any evidence of air leakage
Visual Inspection	After passivation, every single length of tubes & pipes is subjected to thorough visual inspection by trained staff for detecting surface flaws & other imperfections

Supplementary Testing : Apart from the above mentioned tests, we also carry out on the manufactured products supplementary testing. The tests conducted under this include:

Eddy Current Testing
O.P Testing
Radiography Testing

Corrosion Testing
Micro Testing
Macro Testing

IGC Testing
Ultrasonic testing
Liquid Penetrate testing

Tag:

Plain End SS Seamless Tube GOST 9941-91 DIN 17456 DIN 17458 EN10216-5 ASME SA213

Stainless Steel Seamless Pipe

Stainless Steel Seamless Tube

Duplex Stainless Steel Pipe

Duplex Stainless Steel Tube

Needle Tube

Fin Tube

Heat Exchanger

Heat Exchanger Tube

Heat Exchanger Tube Bundle

Heat Exchanger Tubesheet

Heat Exchanger Baffle

Air Cooler

Pressure Vessel

Stainless Steel Welded Pipe

Stainless Steel Welded Tube

Nickel Alloy Pipe

Nickel Alloy Tube

Copper Alloy Tube

Alloy Steel Tube

Titanium Tube

Bright Annealed Tube

Boiler Tube

Steel Fitting

Steel Flange

Others

U Bend Tube

Plain End SS Seamless Tube GOST 9941-91 DIN 17456 DIN 17458 EN10216-5 ASME SA213

seamless stainless steel tube,

seamless boiler tubes,

stainless steel seamless pipes

seamless tube din 2391

u bend tube din1629

astm a234 pipe fittings